⇑ Installing Jenkins Index

Docker

Docker is a platform for running applications in an isolated environment called a "container" (or Docker container). Applications like Jenkins can be downloaded as read-only "images" (or Docker images), each of which is run in Docker as a container. A Docker container is a "running instance" of a Docker image. A Docker image is stored permanently, based on when image updates are published, whereas containers are stored temporarily. Learn more about these concepts in Getting Started, Part 1: Orientation and setup in the Docker documentation.

Due to Docker’s fundamental platform and container design, a Docker image for a given application, such as Jenkins, can be run on any supported operating system or cloud service also running Docker. Supported operating systems include macOS, Linux and Windows, and supported cloud services include AWS and Azure.

Installing Docker

To install Docker on your operating system, follow the instructions in the Guided Tour prerequisites.

Alternatively, visit Docker Hub, and select the Docker Community Edition suitable for your operating system or cloud service. Follow the installation instructions on their website.

If you are installing Docker on a Linux-based operating system, ensure you configure Docker so it can be managed as a non-root user. Read more about this in Docker’s Post-installation steps for Linux page of their documentation. This page also contains information about how to configure Docker to start on boot.

Prerequisites

Minimum hardware requirements:

  • 256 MB of RAM

  • 1 GB of drive space (although 10 GB is a recommended minimum if running Jenkins as a Docker container)

Recommended hardware configuration for a small team:

  • 4 GB+ of RAM

  • 50 GB+ of drive space

Comprehensive hardware recommendations:

Software requirements:

Downloading and running Jenkins in Docker

There are several Docker images of Jenkins available.

Use the recommended official jenkins/jenkins image from the Docker Hub repository. This image contains the current Long-Term Support (LTS) release of Jenkins, which is production-ready. However, this image doesn’t contain Docker CLI, and is not bundled with the frequently used Blue Ocean plugins and its features. To use the full power of Jenkins and Docker, you may want to go through the installation process described below.

A new jenkins/jenkins image is published each time a new release of Jenkins Docker is published. You can see a list of previously published versions of the jenkins/jenkins image on the tags page.

On macOS and Linux

  1. Open up a terminal window.

  2. Create a bridge network in Docker using the following docker network create command:

    docker network create jenkins

  3. In order to execute Docker commands inside Jenkins nodes, download and run the docker:dind Docker image using the following docker run command:

    docker run \
  --name jenkins-docker \(1)
  --rm \(2)
  --detach \(3)
  --privileged \(4)
  --network jenkins \(5)
  --network-alias docker \(6)
  --env DOCKER_TLS_CERTDIR=/certs \(7)
  --volume jenkins-docker-certs:/certs/client \(8)
  --volume jenkins-data:/var/jenkins_home \(9)
  --publish 2376:2376 \(10)
  docker:dind \(11)
  --storage-driver overlay2(12)
    1 ( Optional ) Specifies the Docker container name to use for running the image. By default, Docker generates a unique name for the container.
    2 ( Optional ) Automatically removes the Docker container (the instance of the Docker image) when it is shut down.
    3 ( Optional ) Runs the Docker container in the background. You can stop this instance by running docker stop jenkins-docker.
    4 Running Docker in Docker currently requires privileged access to function properly. This requirement may be relaxed with newer Linux kernel versions.
    5 This corresponds with the network created in the earlier step.
    6 Makes the Docker in Docker container available as the hostname docker within the jenkins network.
    7 Enables the use of TLS in the Docker server. Due to the use of a privileged container, this is recommended, though it requires the use of the shared volume described below. This environment variable controls the root directory where Docker TLS certificates are managed.
    8 Maps the /certs/client directory inside the container to a Docker volume named jenkins-docker-certs as created above.
    9 Maps the /var/jenkins_home directory inside the container to the Docker volume named jenkins-data. This allows for other Docker containers controlled by this Docker container’s Docker daemon to mount data from Jenkins.
    10 ( Optional ) Exposes the Docker daemon port on the host machine. This is useful for executing docker commands on the host machine to control this inner Docker daemon.
    11 The docker:dind image itself. Download this image before running, by using the command: docker image pull docker:dind.
    12 The storage driver for the Docker volume. Refer to the Docker storage drivers documentation for supported options.
    If you have problems copying and pasting the above command snippet, use the annotation-free version below: 
    docker run --name jenkins-docker --rm --detach \
  --privileged --network jenkins --network-alias docker \
  --env DOCKER_TLS_CERTDIR=/certs \
  --volume jenkins-docker-certs:/certs/client \
  --volume jenkins-data:/var/jenkins_home \
  --publish 2376:2376 \
  docker:dind --storage-driver overlay2

  4. Customize the official Jenkins Docker image, by executing the following two steps:

    1. Create a Dockerfile with the following content:

      FROM jenkins/jenkins:2.414.3-jdk17
USER root
RUN apt-get update && apt-get install -y lsb-release
RUN curl -fsSLo /usr/share/keyrings/docker-archive-keyring.asc \
  https://download.docker.com/linux/debian/gpg
RUN echo "deb [arch=$(dpkg --print-architecture) \
  signed-by=/usr/share/keyrings/docker-archive-keyring.asc] \
  https://download.docker.com/linux/debian \
  $(lsb_release -cs) stable" > /etc/apt/sources.list.d/docker.list
RUN apt-get update && apt-get install -y docker-ce-cli
USER jenkins
RUN jenkins-plugin-cli --plugins "blueocean docker-workflow"

    2. Build a new docker image from this Dockerfile, and assign the image a meaningful name, such as "myjenkins-blueocean:2.414.3-1":

      docker build -t myjenkins-blueocean:2.414.3-1 .

      If you have not yet downloaded the official Jenkins Docker image, the above process automatically downloads it for you.

  5. Run your own myjenkins-blueocean:2.414.3-1 image as a container in Docker using the following docker run command:

    docker run \
  --name jenkins-blueocean \(1)
  --restart=on-failure \(2)
  --detach \(3)
  --network jenkins \(4)
  --env DOCKER_HOST=tcp://docker:2376 \(5)
  --env DOCKER_CERT_PATH=/certs/client \
  --env DOCKER_TLS_VERIFY=1 \
  --publish 8080:8080 \(6)
  --publish 50000:50000 \(7)
  --volume jenkins-data:/var/jenkins_home \(8)
  --volume jenkins-docker-certs:/certs/client:ro \(9)
  myjenkins-blueocean:2.414.3-1 (10)
    1 ( Optional ) Specifies the Docker container name for this instance of the Docker image.
    2 Always restart the container if it stops. If it is manually stopped, it is restarted only when Docker daemon restarts or the container itself is manually restarted.
    3 ( Optional ) Runs the current container in the background, known as "detached" mode, and outputs the container ID. If you do not specify this option, then the running Docker log for this container is displayed in the terminal window.
    4 Connects this container to the jenkins network previously defined. The Docker daemon is now available to this Jenkins container through the hostname docker.
    5 Specifies the environment variables used by docker, docker-compose, and other Docker tools to connect to the Docker daemon from the previous step.
    6 Maps, or publishes, port 8080 of the current container to port 8080 on the host machine. The first number represents the port on the host, while the last represents the container’s port. For example, to access Jenkins on your host machine through port 49000, enter -p 49000:8080 for this option.
    7 ( Optional ) Maps port 50000 of the current container to port 50000 on the host machine. This is only necessary if you have set up one or more inbound Jenkins agents on other machines, which in turn interact with your jenkins-blueocean container, known as the Jenkins "controller". Inbound Jenkins agents communicate with the Jenkins controller through TCP port 50000 by default. You can change this port number on your Jenkins controller through the Security page. For example, if you update the TCP port for inbound Jenkins agents of your Jenkins controller to 51000, you need to re-run Jenkins via the docker run …​ command. Specify the "publish" option as follows: the first value is the port number on the machine hosting the Jenkins controller, and the last value matches the changed value on the Jenkins controller, for example,--publish 52000:51000. Inbound Jenkins agents communicate with the Jenkins controller on that port (52000 in this example). Note that WebSocket agents do not need this configuration.
    8 Maps the /var/jenkins_home directory in the container to the Docker volume with the name jenkins-data. Instead of mapping the /var/jenkins_home directory to a Docker volume, you can also map this directory to one on your machine’s local file system. For example, specify the option --volume $HOME/jenkins:/var/jenkins_home to map the container’s /var/jenkins_home directory to the jenkins subdirectory within the $HOME directory on your local machine — typically /Users/<your-username>/jenkins or /home/<your-username>/jenkins. NOTE: If you change the source volume or directory for this, the volume from the docker:dind container above needs to be updated to match this.
    9 Maps the /certs/client directory to the previously created jenkins-docker-certs volume. The client TLS certificates required to connect to the Docker daemon are now available in the path specified by the DOCKER_CERT_PATH environment variable.
    10 The name of the Docker image, which you built in the previous step.
    If you have problems copying and pasting the command snippet, use the annotation-free version below: 
    docker run --name jenkins-blueocean --restart=on-failure --detach \
  --network jenkins --env DOCKER_HOST=tcp://docker:2376 \
  --env DOCKER_CERT_PATH=/certs/client --env DOCKER_TLS_VERIFY=1 \
  --publish 8080:8080 --publish 50000:50000 \
  --volume jenkins-data:/var/jenkins_home \
  --volume jenkins-docker-certs:/certs/client:ro \
  myjenkins-blueocean:2.414.3-1

  6. Proceed to the Post-installation setup wizard.

On Windows

The Jenkins project provides a Linux container image, not a Windows container image. Be sure that your Docker for Windows installation is configured to run Linux Containers rather than Windows Containers. Refer to the Docker documentation for instructions to switch to Linux containers. Once configured to run Linux Containers, the steps are:

  1. Open up a command prompt window and similar to the macOS and Linux instructions above do the following:

  2. Create a bridge network in Docker

    docker network create jenkins

  3. Run a docker:dind Docker image

    docker run --name jenkins-docker --rm --detach ^
  --privileged --network jenkins --network-alias docker ^
  --env DOCKER_TLS_CERTDIR=/certs ^
  --volume jenkins-docker-certs:/certs/client ^
  --volume jenkins-data:/var/jenkins_home ^
  --publish 2376:2376 ^
  docker:dind

  4. Customize the official Jenkins Docker image, by executing the following two steps:

    1. Create a Dockerfile with the following content:

      FROM jenkins/jenkins:2.414.3-jdk17
USER root
RUN apt-get update && apt-get install -y lsb-release
RUN curl -fsSLo /usr/share/keyrings/docker-archive-keyring.asc \
  https://download.docker.com/linux/debian/gpg
RUN echo "deb [arch=$(dpkg --print-architecture) \
  signed-by=/usr/share/keyrings/docker-archive-keyring.asc] \
  https://download.docker.com/linux/debian \
  $(lsb_release -cs) stable" > /etc/apt/sources.list.d/docker.list
RUN apt-get update && apt-get install -y docker-ce-cli
USER jenkins
RUN jenkins-plugin-cli --plugins "blueocean docker-workflow"

    2. Build a new docker image from this Dockerfile and assign the image a meaningful name, e.g. "myjenkins-blueocean:2.414.3-1":

      docker build -t myjenkins-blueocean:2.414.3-1 .

      If you have not yet downloaded the official Jenkins Docker image, the above process automatically downloads it for you.

  5. Run your own myjenkins-blueocean:2.414.3-1 image as a container in Docker using the following docker run command:

    docker run --name jenkins-blueocean --restart=on-failure --detach ^
  --network jenkins --env DOCKER_HOST=tcp://docker:2376 ^
  --env DOCKER_CERT_PATH=/certs/client --env DOCKER_TLS_VERIFY=1 ^
  --volume jenkins-data:/var/jenkins_home ^
  --volume jenkins-docker-certs:/certs/client:ro ^
  --publish 8080:8080 --publish 50000:50000 myjenkins-blueocean:2.414.3-1

  6. Proceed to the Setup wizard.

Accessing the Docker container

If you want to access your Docker container through a terminal/command prompt using the docker exec command, add an option like --name jenkins-tutorial to the docker exec command. That will access the Jenkins Docker container named "jenkins-tutorial".

You can access your docker container (through a separate terminal/command prompt window) with a docker exec command such as:

docker exec -it jenkins-blueocean bash

Accessing the Docker logs

You may want to access the Jenkins console log, for instance, when Unlocking Jenkins as part of the Post-installation setup wizard.

Access the Jenkins console log through the terminal/command prompt window from which you executed the docker run …​ command. Alternatively, you can also access the Jenkins console log through the Docker logs of your container using the following command:

docker logs <docker-container-name>

Your <docker-container-name> can be obtained using the docker ps command.

Accessing the Jenkins home directory

You can access the Jenkins home directory, to check the details of a Jenkins build in the workspace subdirectory, for example.

If you mapped the Jenkins home directory (/var/jenkins_home) to one on your machine’s local file system, for example, in the docker run …​ command above, access the directory contents through your machine’s usual terminal/command prompt.

If you specified the --volume jenkins-data:/var/jenkins_home option in the docker run …​ command, access the contents of the Jenkins home directory through your container’s terminal/command prompt using the docker container exec command:

docker container exec -it <docker-container-name> bash

As per the previous section, get your <docker-container-name> using the docker container ls command. If you specified the --name jenkins-blueocean option in the docker container run …​ command above (refer to Accessing the Jenkins/Blue Ocean Docker container if needed), use the docker container exec command:

docker container exec -it jenkins-blueocean bash

Post-installation setup wizard

After downloading, installing and running Jenkins using one of the procedures above (except for installation with Jenkins Operator), the post-installation setup wizard begins.

This setup wizard takes you through a few quick "one-off" steps to unlock Jenkins, customize it with plugins and create the first administrator user through which you can continue accessing Jenkins.

Unlocking Jenkins

When you first access a new Jenkins instance, you are asked to unlock it using an automatically-generated password.

  1. Browse to http://localhost:8080 (or whichever port you configured for Jenkins when installing it) and wait until the Unlock Jenkins page appears.

    Unlock Jenkins page

  2. From the Jenkins console log output, copy the automatically-generated alphanumeric password (between the 2 sets of asterisks).

    Copying initial admin password
    Note:

    • The command: sudo cat /var/lib/jenkins/secrets/initialAdminPassword will print the password at console.

    • If you are running Jenkins in Docker using the official jenkins/jenkins image you can use sudo docker exec ${CONTAINER_ID or CONTAINER_NAME} cat /var/jenkins_home/secrets/initialAdminPassword to print the password in the console without having to exec into the container.

  3. On the Unlock Jenkins page, paste this password into the Administrator password field and click Continue.
    Note:

    • The Jenkins console log indicates the location (in the Jenkins home directory) where this password can also be obtained. This password must be entered in the setup wizard on new Jenkins installations before you can access Jenkins’s main UI. This password also serves as the default administrator account’s password (with username "admin") if you happen to skip the subsequent user-creation step in the setup wizard.

Customizing Jenkins with plugins

After unlocking Jenkins, the Customize Jenkins page appears. Here you can install any number of useful plugins as part of your initial setup.

Click one of the two options shown:

  • Install suggested plugins - to install the recommended set of plugins, which are based on most common use cases.

  • Select plugins to install - to choose which set of plugins to initially install. When you first access the plugin selection page, the suggested plugins are selected by default.

If you are not sure what plugins you need, choose Install suggested plugins. You can install (or remove) additional Jenkins plugins at a later point in time via the Manage Jenkins > Plugins page in Jenkins.

The setup wizard shows the progression of Jenkins being configured and your chosen set of Jenkins plugins being installed. This process may take a few minutes.

Creating the first administrator user

Finally, after customizing Jenkins with plugins, Jenkins asks you to create your first administrator user.

  1. When the Create First Admin User page appears, specify the details for your administrator user in the respective fields and click Save and Finish.

  2. When the Jenkins is ready page appears, click Start using Jenkins.
    Notes:

    • This page may indicate Jenkins is almost ready! instead and if so, click Restart.

    • If the page does not automatically refresh after a minute, use your web browser to refresh the page manually.

  3. If required, log in to Jenkins with the credentials of the user you just created and you are ready to start using Jenkins!

⇑ Installing Jenkins Index

Was this page helpful?

Please submit your feedback about this page through this quick form.

Alternatively, if you don't wish to complete the quick form, you can simply indicate if you found this page helpful?

    


See existing feedback here.